Hi Everyone,
I've managed to get the Marshall though her annual test again,
The head gasket fixed! Had to get the head skimmed. I had to fit a servo with the 300tdi!
Thanks to Brad, he sorted me one out, I got a new master cylinder (single line) for £ 18.00.
I had to cut the pedal aperture in the bulkhead to get it to fit.
See you at billing.
Mark
Servo fitting
-
Dormy
- Posts: 228
- Joined: Tue Feb 21, 2012 11:45 pm
- Info: Sleeping on the job.....Zzzzzz
- Location: Norfolk
Re: Servo fitting
It's a bit funny how when you are used to non servo brakes you wonder what all the fuss is about. Once you have a servo fitted you wonder how you ever made it stop before !
Dormy
Dormy
-
romanyrose
- Posts: 706
- Joined: Mon Feb 20, 2012 8:22 pm
- Info: romanyrose
Re: Servo fitting
G'day Mark, sorry I didn't reply to your PM after you got your truck tested I was unable to see well after trimming down a bush to help thicken it up a bit the sap has got into my eyes and thought so being on my computer is near impossible because I can't see it 
.
Anyhow I am pleased you have it fixed and tested and sorry I forgot about a bit of trimming but you know what you are doing and i guessed you would have made a good job
.
As you would have realized a bit of assistance with your braking really helps with an ambulance 300TDi
.
Catch you later. Brad
.
.Anyhow I am pleased you have it fixed and tested and sorry I forgot about a bit of trimming but you know what you are doing and i guessed you would have made a good job
.As you would have realized a bit of assistance with your braking really helps with an ambulance 300TDi
.Catch you later. Brad
.-
Flo109
- Posts: 80
- Joined: Tue Aug 14, 2012 11:02 am
- Info: 1972 109 LR Marshall Ambulance Camper
- Location: Lincolnshire Wolds
Re: Servo fitting
No worries Brad,
Thanks again, hope to catch up soon.
Thanks again, hope to catch up soon.