Contortionist Needed

Workshop and Technical tips & tricks.
Post Reply
romanyrose
Posts: 706
Joined: Mon Feb 20, 2012 8:22 pm
Info: romanyrose

Contortionist Needed

Post by romanyrose » Mon Dec 23, 2013 1:02 pm

G'day chaps, as per the last post regards heaters :banghead: i have miss placed my glasses and using a magnifying glass to post :embarassed: can you put my last post here please Robin until i find my glasses :thud: brad
overlander
Posts: 294
Joined: Sun Feb 19, 2012 10:29 am
Info: Carawagon Junkie

Re: Contortionist Needed

Post by overlander » Mon Dec 23, 2013 10:35 pm

Is this what you meant Brad:

G'day chaps, while the rain is lashing down and i have not ventured out into my garage to still try and find some sort of organization although i am getting there i wondered if there is a contortionist out there not just to get in the back of my 109 camper to take out two batteries that need a clean up check and trickle charge but also come up with a better idea of getting at my eberspacher :shrug: .

Unfortunately when i first fitted the sink draining/board and double burner from a caravan i decided to mount my then working eberspacer underneath the draining board and boxed it in using self tappers shortened with the point taken off and with in some occasions spy clips.

Unfortunately i am not so bendy now so need to make an access point from the outside of the body a bit bigger than the eberspacer itself so i can at least take it out get to the flexy pipes that run to the cab area and one to the stainless dog bowl that acts as a collector to the rear of the body that has a vent to open and shut so the cab warms up quicker before setting off.

I have no spare ambulance locker doors and i don't think a standard locker top would be big enough however if anyone has a Gerry can holder that fits in the side of the truck i think this will do :shrug: any ideas advice would be gratefully received also if you need pictures to give you ideas like i said a contortionist to get in the back would be good :thud: and you think i am joking. Catch you later. R-Rose :wine: :tiphat: .

Cheers

John

pp Robin
User avatar
RMS
Posts: 2239
Joined: Wed Feb 15, 2012 12:02 am
Location: Near Wakefield, UK, in God's own Country!

Re: Contortionist Needed

Post by RMS » Mon Dec 23, 2013 11:05 pm

Thanks John :tiphat:
1967 109" Carawagon 200TDi
1972 109" SW Carawagon 2.5NA
1958 109" Carawagon 2.25P (project)
1972 109" Carawagon 200 or 300TDi (project)
1974 Dormobile 2.25D (project)
(Robin on S2C forum)
romanyrose
Posts: 706
Joined: Mon Feb 20, 2012 8:22 pm
Info: romanyrose

Re: Contortionist Needed

Post by romanyrose » Tue Dec 24, 2013 12:31 am

:cheers: yes that was what i meant although talking in riddles is a common thing for me and i know what i mean but making it easier for others to understand might mean i find the type of person i need :laugh: .

So i thank you John for what you have done and again sorry Robin for the confusion yet again but you will be pleased to know i have now found my glasses :embarassed: well that's my excuse anyway :whistle:.

Catch you later. Brad :wine: :holly_arrive: yes you never know it will happen one day :cactus: .
Post Reply