G'day chaps, well i thought today was going to be a good one but having seen my doc who prescribed anti biotics that were so strong my lass could only get them from a certain chemist along with all the other medication so they could hit the burn in one hit{her words not mine}.
Well i know i am slow but WOW! i am even slower and more confused
![stars :stars:](./images/smilies/stars.gif)
but i carried on with working out a locking system to stop my canopy flying out of it's tubes with the power of the old 2-1/4 petrol but on the other hand i could just be going up a very steep hill which i guess is more like it
![laugh :laugh:](./images/smilies/laugh.gif)
.
I have a small R clip soldered to a brass sink plug chain and the other end riveted to my alloy work light bracket, an inch in depth stainless steal U shaped bracket is riveted to the bottom part of the work light mounting below the work light bracket that also has the hole for the center pole of the canopy, a picture when Janie gets back on Sunday will help one understand
![shrug :shrug:](./images/smilies/shrug.gif)
.
Anyway the other half of this nice brass sink plug chain i soldered an inch long steel clevis pin the same length as the chain with the R clip on and riveted in the same way but on the opposite side of the bracket mentioned before which means i can't drop or loose anything at anytime for what ever reason
![Wink :wink:](./images/smilies/icon_e_wink.gif)
.
This is where my day started to go wrong when my noisy chap next door looked over the fence pulled the usual sarcastic look and went on to say what on earth are you doing or words to that effect for
![thud :thud:](./images/smilies/thud.gif)
, as usual what ever i said he had an answer for and continued to take the mick Oh! i did forget i had some light weight tongue and groove dropped off along with some again lightweight 2x1 second hand but free to help kit out the back of HEC.
This goes on most days and for what ever reason [that's not how landrovers were built} is all i ever hear and it kind of wears one down a bit although i try and take little notice the sarcastic comment's don't stop even though i ask him not to voice his opinion he can't help himself
![banghead :banghead:](./images/smilies/banghead.gif)
.
Sorry to go on but after finding a pin the size needed cleaned the brass chain up and soldered the pin to the chain put the rivet in the hole my chain has gone walk about and after three hours of looking i gave in
![shakehead :shakehead:](./images/smilies/shakinghead.gif)
, maybe not feeling top of the world does not help but i do wish some people would keep there negative thoughts to themselves.
Again sorry for the grumpyness but tomorrow will be a better day
![wine :wine:](./images/smilies/wine3.gif)
. Catch you later. R-Rose
![tiphat :tiphat:](./images/smilies/tiphat.gif)